Show simple item record

dc.contributor.authorCai, Yunshenen_US
dc.date.accessioned2017-04-12T20:18:43Z
dc.date.issued2013
dc.date.submitted2013
dc.identifier.urihttps://hdl.handle.net/2144/21127
dc.descriptionThesis (M.Sc.Eng.) PLEASE NOTE: Boston University Libraries did not receive an Authorization To Manage form for this thesis or dissertation. It is therefore not openly accessible, though it may be available by request. If you are the author or principal advisor of this work and would like to request open access for it, please contact us at open-help@bu.edu. Thank you.en_US
dc.description.abstractThe electrospinning process can produce submicron fibers for a variety of applications since a wide range of polymers can be used. For many advanced applications, achieving the desired fiber diameter, maximizing productivity, and achieving high yield are important production objectives. This thesis addresses several important areas needed to develop a general electrospinning control approach that aids in achieving those objectives including: developing a correlation between process conditions to fiber diameter, developing a method to determine an operating regime that meets manufacture objective, identification of process dynamics needed to develop a realtime control system, and insight into the role that relative humidity (RH) has on the process physics. A primary requirement for developing a general electrospinning control approach is to develop a correlation that maps measurable process parameters to the resulting fiber diameter, since electrospun nanofibers can not be observed in real time. Building on Yans identification of a fiber diameter correlation based on measuring the processes straight jet diameter and the ambient relative humidity for Polyethylene oxide (PEO)/water solutions, this thesis extends that work for a different polymer (Poly(vinylpyrrolidone) (PVP)) using three non-aqueous solvents. A correlation of process measurements to fiber diameter is developed, which is useful for both determining the operating regime (specification of voltage, flow rate and RH that meets the manufacturing objectives) as well as real-time control system design. An interpretation of experimental results also provides insight into the multiple roles that RH has on the electrospinning process physics in terms of the effective electric field that determines the upper jet geometry and current; the total solvent evaporation rate; and the impact of the electric stretching forces in the bending region A generalized operating regime determination strategy is presented that obtains the desired fiber diameter with maximum production rate. In addition, the process dynamics characteristics and how they scale with different operating conditions are identified, which is needed to develop real-time control algorithm. The process dynamics of PVP/alcohol solutions are shown to be similar to those of PEO/water solutions, and are determined by the Taylor cone volume dynamics.en_US
dc.language.isoen_US
dc.publisherBoston Universityen_US
dc.subjectMechanical engineeringen_US
dc.subjectElectrospinningen_US
dc.titleElectrospinning process analysis: the relation of process parameters to fiber diameter and process dynamics for closed-loop control designen_US
dc.typeThesis/Dissertationen_US
dc.description.embargo2031-01-01
etd.degree.nameMaster of Science in Engineeringen_US
etd.degree.levelmastersen_US
etd.degree.disciplineMechanical Engineeringen_US
etd.degree.grantorBoston Universityen_US


This item appears in the following Collection(s)

Show simple item record