Show simple item record

dc.contributor.authorBlonder, Gregen_US
dc.coverage.spatialUSen_US
dc.date.accessioned2019-07-09T20:00:29Z
dc.date.available2019-07-09T20:00:29Z
dc.date.issued1996-11-12
dc.date.submitted1994-12-23
dc.identifierhttps://patents.google.com/patent/US5574258A/en
dc.identifier.citationGreg Blonder. "Heat-shrink crimping device and method." U.S. Patent 5,574,258-A.
dc.identifier.govdoc5,574,258A
dc.identifier.urihttps://hdl.handle.net/2144/36327
dc.description.abstractIn order to establish a low-electrical resistance between two wires, a heat-shrinkable hollow tube is prepared. Three or more small-diameter conductors are attached to the inner surface of the hollow tube, such as by use of an epoxy adhesive. These conductors run parallel to the axis of the tube along its entire length. Each of the two wires is inserted into an opposite end of the tube. The tube is then heated to a sufficient temperature, such that when it cools it collapses and grasps both of the wires firmly, whereby the resulting electrical conductance between them (aided by the conductors) is enhanced.en_US
dc.titleHeat-shrink crimping device and methoden_US
dc.typePatenten_US
dc.description.versionPublished versionen_US
pubs.elements-sourcemanual-entryen_US
pubs.notesEmbargo: Not knownen_US
pubs.organisational-groupBoston Universityen_US
pubs.organisational-groupBoston University, College of Engineeringen_US
pubs.organisational-groupBoston University, College of Engineering, Department of Mechanical Engineeringen_US
dc.identifier.mycv423802


This item appears in the following Collection(s)

Show simple item record